Pin down the quote
Get the dealer or seller to put the model, serial number if known, price, delivery and installation in writing. The amount financed is built from this document.
Equipment · Canada
Short answer
Equipment financing & loans for businesses in Canada should match the purpose of the money and the cash available for repayment. Compare written fees, payment dates, security and eligibility with the provider. AIDBIZ can review your funding request; approval and timing depend on the funding partner.
Across Canada, compare equipment financing against the actual project budget, repayment source, existing debt and applicable borrower, provider and provincial requirements. The machine, vehicle or system you are buying secures the financing, which is why younger businesses and imperfect credit files still get approved.
Local funding context
Canadian requests for equipment financing span the country’s regional economies: contractors, restaurants, technology vendors and logistics companies in the Toronto, Montreal and Vancouver metros, auto and EV suppliers in Ontario, aerospace suppliers in Quebec, oilfield-service and trucking companies in Alberta and Saskatchewan, mining and forestry contractors from British Columbia to Labrador, farms, dealers and grain haulers on the Prairies, fishing and seafood businesses in the Atlantic provinces and healthcare and dental practices in every province.
Costs vary sharply by province. The federal small-business deduction cuts the combined corporate rate to roughly 9 to 12 percent on the first $500,000, GST is 5 percent with provincial sales tax or HST of up to 14 percent layered on top, CPP and EI premiums apply to every payroll and provincial minimum wages run from $15 in Alberta to $18.25 in British Columbia. Toronto and Vancouver rents and housing are the highest in the country; the Prairies and Atlantic Canada are among the cheapest.
Canada generally prohibits interest above 35% APR. The commercial exemption requires a borrower that is not a natural person and a business purpose: credit above $10,000 through $500,000 must not exceed 48% APR; credit above $500,000 is exempt from section 347 under that rule. A sole proprietor does not qualify merely by borrowing for business. Other legal duties can still apply. Request the annualized cost, all fees, payment schedule, security, guarantees and early-payment terms in writing. Disclosure requirements depend on the borrower, provider, contract and province; do not assume business financing is unregulated. Interest Act section 4 has an annual-rate disclosure rule for certain non-mortgage agreements quoting interest for periods shorter than a year.
The Business Development Bank of Canada serves every province with term loans, working-capital loans and advisory services, the Canada Small Business Financing Program guarantees loans through the banks and credit unions, Export Development Canada backs exporters, the regional development agencies fund projects in each region and the Community Futures network, Futurpreneur and provincial business services add counselling and small loans.
Canada’s small-business map runs from Toronto’s Bay Street, Montreal’s Plateau and aerospace corridor and Vancouver’s port and technology districts through Ottawa’s federal economy, Calgary’s energy towers and Edmonton’s industrial heartland, Winnipeg’s CentrePort and Saskatoon’s mining base, Halifax’s shipyard and waterfront and the auto plants of Windsor and Oshawa, out to the grain belt, the oil sands, the B.C. interior’s forestry and mining, the Okanagan and Niagara wine regions, the Atlantic fishing ports and the tourism economies of Whistler, Banff, Muskoka, Charlevoix and the Cabot Trail.
Equipment financing in local practice. In Canada, manufacturers finance CNC machines, packaging lines and automation, often through vendor programs; carriers and owner-operators finance tractors, trailers and reefer units with the truck as security, within age and kilometre limits. Contractors finance excavators, loaders, lifts and work trucks against the machines themselves, leaving bank lines free for materials.
What to evaluate
| Region | Signature sectors | Funding pattern |
|---|---|---|
| Ontario | Financial and technology vendors, auto and EV suppliers, construction, logistics | Lines and factoring for vendors; equipment and PO financing for suppliers; equipment and lines for contractors |
| Quebec | Aerospace and manufacturing suppliers, technology and gaming, restaurants | Equipment and PO financing; lines and factoring; working capital |
| British Columbia and Alberta | Port logistics, construction, oilfield services, technology, tourism | Equipment financing and factoring for carriers and oilfield services; lines for vendors; seasonal capital |
| The Prairies and Atlantic Canada | Agriculture, mining, fishing and seafood, shipbuilding, manufacturing | Equipment loans, seasonal working capital, factoring tied to industrial terms |
How it works
With equipment financing, the lender or lessor pays your vendor and you repay on a fixed schedule set to roughly match how long the asset will earn its keep. Because the equipment stays pledged until the last payment, the lender looks hard at the quote, the make and model, its age and how easily it could be resold, and somewhat less at your credit history. A Canada landscaper adding a compact track loader and a clinic adding an ultrasound unit are approved on the same logic: the asset itself carries much of the risk.
You will see two structures. A loan, often called an equipment finance agreement, puts the asset in your name with the lender registered against it, through a UCC filing in the US or a PPSA registration in Canada. A lease leaves ownership with the lessor; a nominal-buyout lease works much like a loan, while a fair-market-value lease carries a smaller payment and a choice at the end to return, extend or buy. Ask which one a Canada quote is before comparing numbers, because the accounting, the tax treatment and the end-of-term obligations are different.
Lenders will often finance the whole invoice, and many will add delivery, installation, training or an extended warranty as long as those soft costs stay a modest share of the total. Terms usually run from two to seven years: shorter for computers and other kit that ages quickly, longer for trucks, heavy machinery and medical devices that keep their value. Payments are normally monthly and fixed, so they slot into a Canada budget alongside rent and wages.
Cost structure
Compare the deposit, amount financed, payment schedule, fees and ownership at the end of a loan or lease. Ask whether delivery, installation and insurance are financed or paid separately. Used equipment and private-seller purchases need provider confirmation.
Hypothetical example for Canada: using $132,000 and the rate and repayment assumptions stated in the table below gives payments between $2,614 and $4,271, and total repayment between $156,825 and $256,239. These are calculation scenarios, not published market rates or current offers. Additional fees are excluded.
Build the same comparison from a dated written offer. Include amounts deducted before funding, payment dates, additional charges and any balance due at the end. Test the cash remaining in a weaker month before choosing an amount. Provider approval and a manageable payment are separate questions.
Payment estimator
Hypothetical Canadian-dollar calculations, not Canadian market rates or offers. Fees are excluded; applicable interest rules depend on the borrower and contract.
$3,497 per month and $209,832 in total payback (20.0% assumed annual interest; 60 months; fees excluded).
Hypothetical figures using the stated term or collection period. Fees are excluded. Revenue-based amounts are averages over an assumed period, not fixed payments.
| Scenario | Estimated payment | Total payback / customer settlement | Basis |
|---|---|---|---|
| Lower assumption | $2,936 / month | $176,176 | 12.0% assumed annual interest; 60 months; fees excluded |
| Midpoint | $3,497 / month | $209,832 | 20.0% assumed annual interest; 60 months; fees excluded |
| Higher assumption | $4,110 / month | $246,596 | 28.0% assumed annual interest; 60 months; fees excluded |
Secure eligibility check
Share a few details about your Canada business and the equipment financing amount you have in mind to start a confidential, no-obligation review. This step does not use a hard credit pull.
Qualification
Confirm each requirement with the provider; no single item guarantees approval.
| Criterion | What to confirm | Why it matters |
|---|---|---|
| Time trading | Ask whether the provider accepts your operating history | Requirements differ by product and business stage |
| Credit | Ask what personal, business or customer credit review applies | A single score does not establish approval |
| Money down | Confirm the provider’s requirements for this item | Prepare supporting records and resolve the requirement before committing |
Documents
Prepare the records requested by the provider. Complete documents help the review but do not guarantee a decision or funding date.
Timeline
Get the dealer or seller to put the model, serial number if known, price, delivery and installation in writing. The amount financed is built from this document.
Ask the provider for its document checklist and submit complete, consistent records through the protected process. Do not assume a particular amount qualifies for reduced documentation.
The provider reviews the business, repayment capacity and any product-specific invoices, assets or security. Ask which checks remain outstanding and when a decision can be expected.
Review the written terms, costs and approval conditions before signing. Confirm any security, guarantees, deposit and insurance requirements.
Confirm when funds are available, who receives them and when the first payment is due. Approval, disbursement and cleared funds are different stages.
Fit
Best for: Vehicles, machinery, medical or restaurant equipment, technology.
Alternatives
Compare the products a Canada business is most likely to be offered alongside equipment financing; each guide below sets out structure, timing, credit guidelines and uses side by side.
Common questions
A provider may consider new or used equipment needed by the business. Supply an itemized quote and ask about permitted asset types, age, condition, useful life and vendor requirements. Eligibility depends on the asset and the business, not the equipment label alone.
A deposit may be required. Ask for the amount financed, cash contribution, fees and excluded costs in writing. A provider advertising full financing may still have conditions or costs you must pay separately.
Some providers consider used equipment, subject to age, condition, remaining useful life and vendor checks. Ask whether an inspection or valuation is needed and how the asset age affects the repayment term.
Canada generally prohibits interest above 35% APR. The commercial exemption requires a borrower that is not a natural person and a business purpose: credit above $10,000 through $500,000 must not exceed 48% APR; credit above $500,000 is exempt from section 347 under that rule. A sole proprietor does not qualify merely by borrowing for business. Other legal duties can still apply. Request the annualized cost, all fees, payment schedule, security, guarantees and early-payment terms in writing. Disclosure requirements depend on the borrower, provider, contract and province; do not assume business financing is unregulated. Interest Act section 4 has an annual-rate disclosure rule for certain non-mortgage agreements quoting interest for periods shorter than a year.
Contractors and trades, trucking and logistics companies, restaurants and hospitality operators, auto, aerospace and general manufacturers and their suppliers, oilfield-service and mining contractors, technology and government vendors, healthcare and dental practices and agricultural and seafood businesses.
BDC’s advisory services and business centres in every province, the regional development agencies, the Community Futures network in rural Canada, Futurpreneur for founders under 40, provincial small-business services and the local chambers of commerce and boards of trade.
A loan or a nominal-buyout lease fits equipment you plan to run for its whole life. A fair-market-value lease fits technology or vehicles you expect to swap out every few years and want a lower payment on. Have your accountant compare the tax effect of each first.
Some lenders will, with an inspection, a bill of sale and proof there are no liens on it. Many prefer dealer or manufacturer sales because the price and condition are easier to verify, so ask before agreeing to a private purchase.
Timing depends on the provider, complete documentation, verification and any closing requirements. Ask what must happen before money is available; an initial response is not a funding commitment.
No. AIDBIZ is a team of funding specialists with more than five years in the industry. We prepare the file and put it in front of lenders and lessors that finance your type of equipment; the lender makes the offer and holds the security.